江华

The DPH-260L is Jianghua's roller-plate thermoforming blister packaging machine, the middle of three tiers: 400–600 cards/min on alu-PVC, 180–360 on alu-alu, forming area 270 × 260 mm, forming dept...

Most people look at the DPP-320H and conclude it is a tier below the roller machines, because its output is lower. That reads the machine wrong. Its dividing line is not speed but 26 mm of forming ...

Alu-alu blister packaging blocks moisture and light far better than alu-PVC, although on the same machine output drops to roughly six tenths and both the material and the tooling cost more. Whether...

A blister cartoning machine comes in two linked forms and one separate one. An integrated blister cartoning machine puts the blister section and the cartoning section on one frame under one control...

Choose the machine class based on the depth and forming area your product requires, then compare output on the material you intend to use. The thermoforming blister packaging models presented accom...

A pharmaceutical blister packaging machine is the core equipment for packaging solid dosage forms — and a stage on a GMP production line where the investment is significant and the selection decisi...